In this age of technology and advanced science, there are so many new electrical tools and materials through which you can easily maintain your home equipment or even your vehicles. One of such components are connectors and with the help of connectors you can easily keep in touch two different parts of electrical devices together. But there are times when you need to separate them to avoid any sort of dangerous explosion or effects you can get through keeping them together for so long.
Read More: Reverse Camera Installation
How to Depin a Connector?
That is why it is important to know how to depin a connector. Which can be for various reasons like you may want to buy a new connector or maybe you want to repair it, etc. The process of depinning a connector is done very carefully so that no damage can be caused to the connector or the wires which are connected with it. Following steps can help you easily depinning your connector without getting into any sort of hassle.
7 Steps to Depin a Connector:
1. Materials for the Procedure:
The main step in depin a connector is that you must have the tools or materials which are necessary for the procedure and make the procedure easy and simple. The tools can be a screwdriver whose head shape is flat, Wire peelers or cutters, a hand glass, slip-joint pliers and a torch or flashlight for a good source of light during the operation.
2. Which type of Connector are You Using?
The second main point in depin a connector is to identify which type of connector you have. As there are different types of connectors and all of them require different methods for their depinning process. You can contact a local professional for details regarding the connector type or you can search various websites for a better understanding about the process.
3. Scanning of Connector:
The third step in depin of connector is that you must scan your connector properly to detect any locking tabs or release mechanism. There are some types of connectors which require use of different tools for the releasing of pins while others have a place through which you can easily open it up and release the pin without using any sort of tools. You must keep in the connector the number of pins and their certain locations you need to depin.
4. Let go of the Lock Tab:
The fourth step in depin of connector is the locking tabs or release mechanism you detect earlier, by the use of different suitable tools, you should let go of it. And do not press it very hard as it can cause severe damage to the connector or the pins of the connector.
5. Pin Removal From Connector:
The fifth step is to pull the pins of the connector safely and easily without causing damage to the connector. You can do it by using slip-joint pliers for holding the pin and pulling it aligned to the connector. Pull the pin slowly so that there are less chances of damage to the connector’s body.
6. Repeat the Old Procedure:
In the sixth step, you have to follow the old steps for the removal of pins from different connectors and it can be time taking but don’t get irritated because it can reduce the risk of any damage to the connector if you do it slowly and carefully.
7. Rebuild Your Connector with Care:
In the last step, when the depinning of the connector is done, you should make sure that the pins are clean and in a healthy state. And line the pins up in their specific place in the connector and simply push them until they are placed in the connector. Make sure to do this procedure with proper care so that the connector and the pins are safe from any kind of danger.
Also Read: Reverse Camera Installation